For an open-plan office space with individual working spaces the project team has used operable windows in order to provide thermal comfort control.

A WELL certification will be pursued and the project was registered to LEED v2009. IEQ Prerequisite 1 Option 1 will be in line with ASHRAE 62.1-2007.

For option 2 it states the products must demonstrate impact reduction below industry average in at least 3 categories. Where do I find those "industry averages" to know if my products qualify?

We are starting with the process of certifying a project under v4 for BD+C. It is a hotel with a main building with a main building of 5,000 square meters plus 2 additional small buildings of 1.000

Hi! Our site is located in Minneapolis and is a rather complex historic urban infill site. Three quarters of a former industrial site's entire city block was redeveloped by our client.

I received the following comment from a LEED reviewer; "The LEED Form states that the project is mechanically ventilated and that the ventilation system has met the minimum requirements of ASHRAE

hi all, we are doing a feasibility study on a CS major renovation project located in South Italy.

Hello, We were under the impression that painting 100% of our roof areas with SRI tested compliant paint in accordance with the manufacturer technical instructions would meet the requirements of c

Can we consider the IBR (Institut für Baubiologie in Rosenheim) an approved seal which is compliance with LEED v4 requirement for VOC emissions? Attached you will find information regarding VOC te

When submitting energy models to NYC we have to fill out a form called an EN-1 that is very similar to Table 1.4 and provides the same information. Can we provide the EN-1 in place of Table 1.4?