Forum quick links
scope of materials
CI-2009 MRc3.2:Materials reuse - furniture and furnishingsposted by Adam Targowski on
I would like to clarify what should be included in the calculations for this credit.
LUSTs discovered and remediated
CS-2009 SSc3:Brownfield redevelopmentposted by charles bell on
Project is urban core multi-story mixed use CS. Leaking Underground Storage was discovered and remediated (including soil) and identification of water wells in the vicinity.
Requirement for CO2 sensor and OA measurement device
NC-2009 IEQc1:Outdoor air delivery monitoringposted by Barbara McCrary on
I found a thread from 2011 discussing the Addendas released 5/9/11 removing the footnote that was previously changed under Addenda reliease 9/19/10.
Best Timing for ASHRAE Audit?
EBOM-2009 EAp1:Energy efficiency best management practices - planning, documentation and opportunity assessmentposted by Nelina Loiselle on
What is the best timing for the ASHRAE Level I walkthrough audit? We have our energy star label already, are working on getting our tracking in place for the other credits.
Core Fixtures Existing, Tenant to Install Additional Fixtures
CI-2009 WEc1:Water use reductionposted by Nelina Loiselle on
I have a LEED-CI project in which there is one toilet that is EXISTING in the base building and NOT A PART OF THE SCOPE of the tenant improvement.
Motorcycles parking space
EBOM-2009 SSc7.1:Heat island effect - nonroofposted by Rosana Correa on
In our project, some of the parking spaces are specific to motorcycles, with smaller areas than in car's spaces.
Category for IEQ Credit 4.1
NC-2009 IEQc4.1:Low-emitting materials - adhesives and sealantsposted by S D on
I am new to the LEED process. I am having trouble determining which categories the following products fall under for the purpose of IEQ Credit 4.1.
I wonder how I should model a Ventilation system
CS-2009 EAc1:Optimize energy performanceposted by Ron Dean on
I wonder how I should model a Ventilation system to comply with Apendix G ASHRAE, it said that my proposed desing shall be consistent with design documens.. This is the description of my system: &g
LEED Boundary for ESA
Schools-2009 SSp2:Environmental site assessmentposted by Karen Richards on
If doing a 3,700 sf building in the corner of an existing 18 acre school campus, does the Phase I and possibly Phase II assessment need to be for the entire campus or just the area within the LEED
How to identify third-party certifying bodies?
ND-v2009 GIBc1:Certified green buildingsposted by Shenhao Li on
As subject indicated, how to identify third-part certifying bodies as defined by ISO/IEC 17021.