Can select fill mined within the LEED boundary be counted as a regional material? I have not been able to determine if the soil preparation below items included in specification sections 31.60....

When calculating distances from location of extraction and location of manufacturing to project site, is it "as the crow flies" or actual travel distance?

Hi ,
As MRc5 credit Requirment says Raw material extraction and Manufacturing Plant of steel should be below 500 miles (800kms).
But in our case the raw materials and manufacturing...

Hello,
In our project, we decided to estimate real total material cost without equipments and labor for division 2-10. What kind of proof the contractor needs to present in this case? does...

Clearly i know the project team should provide cutsheets for the materials to support regional materials claims,but i cannot get the meaning of "cutsheets".Which kind of information the cutsheets...

a screen shot in this forum). Is each option (1 and 2) worth 1 point? Log in or register to post comments Nadav Malin CEO BuildingGreen, Inc. LEEDuser Moderator 844 thumbs up August 20, 2015- 4:12 pm Yes, LEED-CI 2009 does work as you described. There is a separate forum on LEEDuser for talking about that rating system and credit, so you might want to take your questions about that over there:...

Hello,

One of my clients is asking if concrete sealer can be used for regional content as it is in div 7, is this right?

this comment, since we are at NC forum, the idea not to overcomplicate smth that could be achieved with much less effort is understandable, and you are totally right. But for CI consideration of water in high...

Sometimes I receive a letter from a manufacturer stating that a material is harvested and manufactured within 500 miles of the project site however for proprietary reasons, they cannot disclose...

Materials in particular, but that is an entirely different matter. See LEEDuser’s NCv4 MR forums for the Building Product Disclosure and Optimization credits.] Log in or register to post comments Robert...