We're working on a 40,000 sf existing building undergoing significant interior renovations and lighting upgrades, but will be using the existing mechanical system. We will also be adding 40,000...

Currently I am working on laboratory building and pursuing points for EAc1 Optimize Energy Performance. During the design phase, my team and mechanical consultant made an attempt at energy...

ASHRAE's table G3.1, section 5(a), states the baseline model should not shade itself. If that is the case do you exclude surrounding buildings when calculating the baseline model even if the...

Hi everyone,

i am wondering if we can use the energy prices from the eia.doe.gov (US-Prices) although our project is in Europe? We don´t really understand the Site 273 of the Reference...

Hi

Is lift energy included as a process load as part of the 25% minimum requirement for process loads?

If so are there any references or guidance on how to estimate its energy...

We are working on a materials recycling facility that will be comprised of a two story office building (administration) and a large materials handling space (100,000 sf+) that is attached. The...

There is a rumor floating around about USGBC publishing a comprehensive LEED energy modeling guide (so that reviewers and users are reading from the same pages?). Has anyone else heard such - if...

We are working on two CEP's and the Owner is considering attempting LEED certification for them. I am looking to clarify how you handle the chiller equipment for the EAp2 and EAc1. Based on the...

Although the LEEDUser information for EAc2 is very clear that any...

it s clearly mentioned in this section that the baseline building supply and return fans shall operate continuously whenever spaces are occupied and shall be cycled to meet heating and cooling...