As per Table 6.8.1D, I observed the following
EER = 12.3-(0.213*Cap/1000) EER
Also, Cap means the rated cooling capacity of the product in...

Hi everyone, I have a question regarding the reference's HVAC heating energy source for my projet. Here's the general outline:
My project consist of an office building with 3 above-grade...

Dear Friends,

I have a project located at Dubai where a localized existing district cooling plant will be providing chilled water. However the DCP supplier is not willing to share any...

I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans. Also, the major sum of the energy consumed by the...

I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans. Also, the major sum of the energy consumed by the...

I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans. Also, the major sum of the energy consumed by the...

I am working on an energy model for a Factory that was registered under LEED v3. The factory has no HVAC system except for some ventilation fans. Also, the major sum of the energy consumed by the...

Dear All,

I am doing Energy Model for Shopping Mall Project. Currently, I am working for Proposed Case. As per the design, the proposed system is 10 no of VRF with COP 3.8. VRF has...

Hi All,

I am working on a LEED 2009 project based in Europe. I just wonder shall I use the latest utility rate in 2016 or the old one in 2010? Shall I put Dollars or Euro in the model?...

Hi,

I am doing energy simulation for G+4 Labor Accommodation building. In base case, i have considered 2.66 COP. Auto sized as per ASHRAE.

In proposed case, VRF System used with...