What options in terms of compliance paths might one take when working with a manufacturing facility with high process loads? We are currently working on 20,000 sqft brewery project and are...

In the proposed building there is a semiheated space (climate zone 4, heating power 40 W/m^2, no ventilation, no cooling). In the baseline model shall that space be modeled without HVAC system?...

In the proposed design an...

Hi,
I know that Appendix G states that if the envelope of a building is renovated, then the existing envelope construction is used for the baseline. Does this also hold true if the...

Hi,
90.1-2007 confuses me a little.
Our project (4 story, 9000 m²/90000 ft²) is located in climate zone 1b. The proposed building is heated by an electrical heatpump. There is no...

We have an existing facility (bus maintenance garage) which is attempting to be Certified. The maintenance...

Research regarding the energy benefits of green roofs is really sparse from my experience. Multitude of forums have had discussions on this topic, and the unanimous verdict seems to be that there are no real...

My project consists of the following types of spaces:
1. Office: 2,300 SF
2. Manufacturing / laboratory: 24,055 SF
3. Warehouse: 26,905 SF
4. Shell space for future fitout...

Hi!
The building i need to simulate is naturally ventilated and is located in Italy (climatic zone 4A).
Which outdoor air rates must be set in the Baseline and Prosposed Case as...

Hi all,

Mid-design, the building owner has decided to implement the Lutron Quantum system. This is the plan:

Over 95 percent of light fixtures in the building will be individually...