We are facing a complicated CHW distribution in one of our energy model, we have 2 chillers feeding a constant flow primary loop that serve heat exchangers.

From the heat exchangers start...

We have a conflict between the LEED floor area which clearly excludes underground parking (in our case) and the area of the energy simulation. I have tried to find clarification on the area of...

All,

We are attempting to accurately model the gas energy usage for the...

I am currently modeling a hotel with less than 20,000sqft (specifically 19720) of non-residential space. When modeling I understand I must use system 2 (as it has electric heating) for the...

Hello,

The new revised section 1.4 form asks the values in US units. Can we fill the form in SI units? We did the modeling in SI units and we believe that we should fill the form in SI....

Hi,
I am simulating a petrol station where the advertising has built-in lighting that works at night. We assumed that this is 9.4.5 exception B. The power...

3, 2013- 9:04 am Hi Marcus, I read many discussions in this forum stating that "You do not have to model heating or cooling in unconditioned spaces", which would be my case. So, why should...

Table G3.1.1A states that buildings that are “…eligible for more than one baseline system type should use the predominant condition to determine the system type for the entire building except as...

Dear all,
I'm working on a passive building in which it was decided, as energy efficiency technique, to be buried. I wonder if the baseline case must be modeled on ground floor as the...

I am working on a project under LEED NC 2009 where the com Rooms and server rooms are served by computer room units (CRAC) with dehumidification and reheat. i have done some research and it is...