Hello again! We are finalizing our model for a v3 Core and Shell Building Renovation. Our model is telling us that our process loads are under the requisite 25%, 23.66% to be exact. We would...

Can anyone please clarify which, if any, minimum efficiency requirements are set for heat-pump dehumidifiers (indoor swimming pool dehumidifiers) under ASHRAE 90.1 (2007)?

Hi,
Our problem is with PTHP (cooling mode) new construction.

The footnote 'c' is bit confusing. According to the footnote, the capacity should be in KW and some publish documents...

Hello,

I have a question on which HVAC system type to choose for the baseline case for a project consisting of 4 buildings. The buildings have separate HVAC systems designed, and each...

Similarly to the situation of this picture
http://www.waymarking.com/gallery/image....

I,m working on a project were the proposed building has 2 ground water heat pumps with total capaciyt approx. 2300 kW. According to ASHRAE G3.1.1 should I select the system 7, fossil fuel boiler...

I'm working on a Vehicle Maintenance Facility that is one-story, 110,000 sf with the following breakdown:

-approx 85,000 sf of indoor parking
-approx 11,000 sf of mechanics...

Hi, I have modelled a project following Appendix G. I received review regarding HVAC system baseline type selection.

The project is a mayor renovations + Additions (existing conditioned...

Hallo Marcus,

I am doing a WBS for an office building, which cooling is supplied by ground water.
The only energy consumption of ground water cooling is the energy need for the...

Hi all,

I would be grateful if somebody could direct me to any resources that outline how to accurately model commercial kitchen energy usage.

Regards,

Dónal