Hello Marcus.

We have a healt care building and I would like to know if my baseline HVAC model approach is correct.

The building has 12 floors. So it will classified as system 7 (...

Two buildings (“building A” and “building B”) are on adjacent sites. The project team wants to achieve two different LEED NC certifications. The buildings are heated by the same geothermal heat...

Hello,

Regarding a campus project: We have several buildings (11 small ones) within one campus and several processes going on within the campus, but outside of any building. Some of these...

I overlooked the demand control requirement for the baseline system in the energy model, and have been directed by the reviewer to install it in 3 rooms based on calculation numbers, which makes...

Dear all,

I am having one difficulty in filling the form of EAp2. The “Total Energy Use” of the proposed design is dividing the sum of the values per 100, resulting in an error message and...

Dear all,
I need to know if anyone did experience that before. My process loads exceeds the 25% though; on the scorecard EAp2 the process load compliance is (N), I tried...

Dear All,

As part of the Alternative Compliance Path, "Projects outside the U.S. may use an alternative standard to ANSI/ASHRAE/IESNA Standard 90.1-2007 if it is approved by USGBC as an...

I'am modelling a building with 2 levels of underground parking, which is unconditioned, opened to the outdoor, and having 4 fans (2 supply and 2 exhaust), while the exhaust fans are DCV's based...

We are looking at an existing 300,000 s.f. hotel highrise in a downtown location that is currently on a citywide district steam utility. There are extensive interior architectural changes and a...

Hello everyone,

We are working on an industrial facility project, in this case the process loads represent a 60-70% aprox.

The intent of the client is to bring equipment from...