I am wondering what the correct assumption should be an...

My project uses ground-source heat pump and also VRV system. However, there is no minimum efficiency requirement in ASHRAE 90.1 for them. How should I fill the ASHRAE compliance form. May I leave...

We have a 2-story bldg. over 25,000 sq.ft. that has offices and anicllary spaces; one adjacent 2-story high theater; and one adjacent 2-story high Gym.

We are modeling it as one HVAC...

hello folks,

I just received the comments from the reviewer and have some questions about them. The reviewer questioned a lot about the fan power simulation.

Q1. AppendixG assumes...

CI Project:
Retail Areas inside a mall open their doors in the morning and stand open during the working day. These shops will be conditioned and mech ventilated. Their doors will however...

Time Set Point Not Met Tolerance is 0.2°C ( ... DOE had specified a tolerance of +-0.5F for this...energyplus has a default of 0.2 degC). Am I justified in relaxing this tolerance on a system...

How should projects that feature life-support systems for medical purposes account for their energy loads to comply with the prerequisite? These are 24/7 systems that also require redundancy so...

Our Project is an industrial production building with big heat presses for carbon fiber parts.
We are in an early stage and we estimated that about 75 % of the energy costs will be related...

Since this EA Credit seems to be the home for discussion about Factories and Industrial Buildings you may be able to tell us if this book is any good ?

"Green Facilities: Industrial and...

I need to pin down the required efficiencies.

System Type: Packaged rooftop air conditioner
Fan Control: Constant Volume
Cooling Type: Direct Expansion (DX)
Cooling...