My current CS Project using the water saving fixtures and saving the water up to 36% Reduction and our project will used the gray water from waste water treatment plant for all the flush fixtures w

Dear All, We are modelling a Baseline Building with System 8 “VAV + PFP boxes” using HAP by Carrier. We are wondering how to model the VAV + PFP boxes according to ASHRAE 90.1 Section 3.1.3.14.

Greetings everybody I'm modeling a datacenter and there are few issues about which I'm wondering how to proceed. The project consists of two building adhered to each other.

Dear Sirs, We are consultants for a mall seeking LEED. Most of the spaces will be tenanted.

In all my 40 LEED projects I have never included labor and delivery to a material's cost total.

Hi Every one, Currently we are working for factory building project which has registered five months before under USGBC Rating system LEED 2009.

Where as multi-family apartment buildings need zoning required parking, as designers of senior independent living facilities, we have found that most municipalities will modify there zoning require

Our client would like to certify a building that had its structural components and facade built a few years ago.

I am starting to see a specification for 3. Dry-Fog Coatings: VOC not more than 400 g/L. in MasterSpec and some projects' LEED specs.

Hi, Initial design review has just been returned for our project.