Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Ventilation requirements for naturally ventilated spaces

NC-2009 EAp2:Minimum Energy Performance
posted by  Jean Marais  on 

A difficalt case: Radiant floor + Nat Vent LEED increased ventilation credit requires that when using the macroscopic airflow simulation compliance path for naturally ventilated spaces: 1) 90% of t

7
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Tue Jun 4, 2013, 2:30 pm

Modeling Thermal Zones

CS-2009 EAp2:Minimum Energy Performance
posted by  Attiq Rahman  on 

I am modeling an office building for LEED which will house different tenants that will consists of a dental clinic and medical clinic etc. There are number of different spaces in the building.

3
Default Avatar
Mechanical Designer
Clark Trombley Randers
LEEDuser Basic Member
0 thumbs up
Tue Jun 4, 2013, 1:31 pm

Documentation language for international projects

General forums
posted by  Saliha AIT   on 

Hi, USGBC said in a FAQ document that it is not needed to translate all documents in english but the important part of them.

5
b.i.g. Bechtold DesignBuilder Expert
LEEDuser Basic Member
581 thumbs up
Mon Jun 3, 2013, 9:50 pm
7
Default Avatar
Voith & Mactavish Architects
LEEDuser Basic Member
3 thumbs up
Mon Jun 3, 2013, 8:00 pm

PTAC MERV 13

NC-2009 IEQc5:Indoor Chemical and Pollutant Source Control
posted by  Erika Duran  on 

Based on the July 2010 addendum, MERV 13 Filters are only based on Outdoor air stream.

5
Mon Jun 3, 2013, 7:37 pm

illuminance level of lighting power density of ashrae 90.1

CS-2009 EAp2:Minimum Energy Performance
posted by  tiantian zhou  on 

ashrae 90.1 give the LPD of different space. But i want to know what the correspondent illuminance level is.

5
Mon Jun 3, 2013, 1:54 pm

Non-US Projects

CI-2009 IEQc2:Increased Ventlilation
posted by  Phillip Cook  on 

It says that projects outside the US may use a local equivalent.

2
Fri May 31, 2013, 9:53 pm

Part 2 of the article does talk about v4

General forums
posted by  Nadav Malin  on 

Look like I was a little too quick to complain, in my long critique, about how Frank didn't make use of my interview.

13
director
multiflow taiwan
LEEDuser Basic Member
2 thumbs up
Fri May 31, 2013, 7:17 pm
13
Architect
Buro Happold
LEEDuser Basic Member
55 thumbs up
Fri May 31, 2013, 5:21 pm

Combined or separate submeters

CI-2009 EAc3:Measurement and Verification
posted by  Mike D  on 

Does the credit require separate submeters for each equipment or can those be combined? Our project design includes a submeter that is for both the hot water and HAVC system combined.

3
Default Avatar
LEEDuser Basic Member
45 thumbs up
Fri May 31, 2013, 3:56 pm