1. If we decides to use 'Building area method' for energy modeling. We have to building area type including office and parking garage.

We have a project located in an area where the bicycle network is not planned but the building is served by a major national road which limits the speed to 40 km /H.

It appears that Option 2, "No Cooling Tower," has been removed from this credit with addendum #10002465.

Good afternoon colleagues, we have recently received comments (by LEED reviewers) about the EPDs we use for LCA in the baseline model that are not the standards to consider in the U.S.

If we have a separaetly HVAC served storage garage that is quite large and mimininally heated, does this area have to be included in the whole building flush and maintain the higher than normal tem

Hello LEEDusers, I have a project which consist a typical office building in Hong Kong, each floor contain 2 PAU which contain 200L/s flow rate, the building is not very large each floor consist 2

Neither the USGBC LEED Library nor the first printing of the reference guide include the Multfamily Pathway for Option 3; therefore, this pathway is nearly impossible to locate without referencing

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

Does anyone up here do or have familiarity with anyone who regularly does NEPA EIS?

Does anyone have access to a v4.1 low-emitting calculator? Since some categories are now quantified by cost, volume, or square footage it warrants a different calculator.