Hi, Does anyone know if there are any extra requirements aside from the optional BECx in LEED for HC vs Canada NC 2009? I can't see any but have been told there are more visits required.

I am working on my first LEED project so I apologize for this newbie question.

Hello, In first place, I apologize for my English.

hii, we are doing a LEED-CI project, in our project scope I found Dishwasher only water consuming appliance, with this can I apply for this credit and whether this will be acceptable or not??

According to EA5 Measure and verification, required 1 year of energy usage report. But in PI from 1: Minimum Program Requirement (PIf1-1), required for duration of five years. Is it under same Ener

The reviewer for a current project of mine did not accept (pending) the Low Emitting Furniture and made the following comments: That I did not include the systems furniture for the offices (I list

Is a roofing adhesive that is intended to seal the roof deck to the vapour barrier considered to be on the inboard side of the weatherproofing membrane?

Hello to everybody, I have to model multiple buildings in a field, it´s not a campus, but three of four buildings, some of which are served by the same group of chillers. As I understand, the ener

Just compared the OA rates measured at each AHU by the TAB contractor with our ASHRAE calculations.

Hi, does a damper actuator qualify as an active control? Per CIR#10242, "Active control is the control capable of sensing space occupancy and adjusting the HVAC system demand based on the changes