Emily Purcell
Sustainable Design Lead
CannonDesign
LEEDuser Expert
379 thumbs up
Forum quick links
Forum
Topic
Replies
Recent
ISO requirements for EPDs
NC-v4 MRc2:Building product disclosure and optimization - environmental product declarationsposted by Craig Graber on
Hi, this is Rebecca from Atelier Ten.
10
Mon Sep 17, 2018, 8:33 pm
LEED boundary - urban infill project - LEED V4 C&S
CS-v4 MPR2:Must use reasonable LEED boundariesposted by Thomas Gibbons on
Hi folks,
1
Tue Sep 18, 2018, 1:43 pm
why only a plan and not a final report after M&V?
NC-2009 EAc5:Measurement and Verificationposted by ANNE JURAN on
To earn this credit all we submit is the plan which basically says we're going to recalibrate and we'll deal with any problems later, right? Is there any backcheck from GBCI on this?
11
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Mon Sep 17, 2018, 7:25 pm
USGBC rainfall events calculator
NC-v4 SSc4:Rainwater managementposted by Leanne Niu on
We could not get the 10 years of the historic daily rainfall data, if we could leave the sheet of historical data blank? and how we calculate the total runoff we need to control on site?&
9
Regional Stormwater Leader
Arcadis North America
LEEDuser Expert
144 thumbs up
Mon Sep 17, 2018, 5:59 pm
Carpet Tile as an Entryway System
NC-v4 EQc1:Enhanced indoor air quality strategiesposted by James Keohane on
The Reference Guide for EQc1, Option 1- Entryway Systems describes entryway system in part ..…...
1
Thu Oct 18, 2018, 1:08 am
roof definition
NC-v4 SSc5:Heat island reductionposted by Gerren Wagner on
In the LEED certification glossary, a definition for roof is not given. Previously in v3, roof was defined as area covering occupiable space. For a v4 project, could roof areas that cov
0
BD&C vs ID&C Tenant in non-LEED building
LEED Rating System Selection
posted by David Edenburn on
I have a client that will be renovating the majority of an old warehouse. Since his lease is > 60% of the building GFA, is he required to do NC?
1
Thu Oct 25, 2018, 5:50 pm
software available to analysis LCA
NC-v4 MRc1:Building life-cycle impact reductionposted by Prakash Sekar on
What are the software available to analysis LCA credit
2
Project Director
WSP USA
LEEDuser Basic Member
381 thumbs up
Sun Sep 16, 2018, 10:34 am
90.1-2010 Minimum Equipment Efficiencies
CS-2009 EAc1:Optimize Energy Performanceposted by Tom Nichols on
I have an interesting situation. I am looking to model a 60 ton (720,000 Btu/hr) WSHP. The tables 6.8.1 in 90.1 do not identify the efficiency ratings for a WSHP in cooling or heating m
1
Mon Sep 17, 2018, 3:17 pm
How to talk to clients about materials transparency - AIA
Green Commons
posted by Heather DeGrella on
Nice brief article on how to talk to clients about materials transparency. It was the right level of information to send out to the office at large.
0