Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

Core and Shell Definition

CS-2009 EAc1:Optimize Energy Performance
posted by  Tom Nichols  on 

Can a building without a core HVAC systems be certified under LEED CS? For example, a two story building with a 6,500 ft2 footprint per floor.

3
Default Avatar
LEED AP (O+M)
4 Elements Group
LEEDuser Basic Member
34 thumbs up
Sun Apr 17, 2011, 6:58 pm

LEED for Healthcare in Second Public Comment Period

General forums
posted by  Mike Barker  on 

Any idea how many hospitals were rated using LEED 2009 and the older versions ?

2
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Fri Apr 15, 2011, 9:33 pm

RO Reject Water

posted by  Angela Tana  on 
2
Director, Sustainable Buildings and Operations
KEMA
LEEDuser Basic Member
46 thumbs up
Fri Apr 15, 2011, 7:34 pm

SSc7.2 Inquiry - Subterranean 'Roof'

CS-2009 SSc7.2:Heat Island Effect—Roof
posted by  Patrick MacPherson  on 

Hello, The project I am working on consists of a tower with subterranean spaces that lie beyond the tower's footprint.

5
Default Avatar
Senior Consultant
Sustainable Design Consulting
LEEDuser Basic Member
12 thumbs up
Fri Apr 15, 2011, 2:47 pm

Phase II

Schools-2009 SSp2:Environmental Site Assessment
posted by  Terry Squyres  on 

If your project finds contamination on site during construction, does remediation have to be complete before the LEED design application can be submitted?

6
Principal
Studio4, LLC
LEEDuser Expert
120 thumbs up
Thu Apr 14, 2011, 3:42 pm

parking garage

posted by  Lisa Marshall  on 
7
Representative
Vermont House of Representatives
LEEDuser Expert
7780 thumbs up
Thu Apr 14, 2011, 10:42 am

Excluding Casework from IEQc8.1 & IEQc8.2

Schools-2009 IEQc8.1:Daylight and Views—Daylight
posted by  John Drigot  on 

On a previous LEED for Schools 2009 project I was sucessful in not including the space occupied by built-in casework in the occupied square footage of a space.

2
Wed Apr 13, 2011, 4:22 pm

Certification Requirement

General forums
posted by  Peter Doo  on 

The Reference Guide states that the final step to certification occurs when "certificates of occupancy for buildings...have been issued..." Does this mean that 100% of the buildings must be constru

2
LEED Faculty (ND), AICP, Senior Associate, Green Urbanism
Global Green USA
LEEDuser Basic Member
36 thumbs up
Wed Apr 13, 2011, 3:12 pm

LEED Boundary and equipment

CS-2009 EAp2:Minimum Energy Performance
posted by  Gabriela Hernández Castillo  on 

We have a mixed use project with several buildings on it, from which one of them will apply for LEED-CS certification.

2
Tue Apr 12, 2011, 10:16 pm

Occupancy Sensors

NC-2009 IEQc6.1:Controllability of Systems—Lighting
posted by  Lindsay Duncan  on 

In the past GBCI has stated as a side note: "For future projects, please note that occupancy sensors alone are not an acceptable form of lighting control".

3
Default Avatar
Vice President
Thornton Tomasetti
LEEDuser Premium Member
188 thumbs up
Tue Apr 12, 2011, 8:06 pm