I'm not sure if this belongs here or in EC1. This is for a LEED-S 2009 renovation project with an addition. We have updated our energy model input based on the initial design review comments.

We have documented 4.1, 4.2, 4.3 and 4.6 by alternative compliance using NC 2009 rules. At the bottom of the form it only shows that I have documented 1 point. Any ideas?

A commercial office building with a footprint of 70,000 square feet has an overall site area of 200,000 square feet.

We received our Precertification Final Decision for our Core and Shell building. LEED online indicates I can accept or appeal the final decision.

Hello Marcus, Can we consider the savings from renewable energy (solar pv) in the energy simulation? We do not have the minimum 10% without renewable energy. KC

This should result in a better LEED experience. I also wonder who is answering these emails though and what the communication is between the person answering and the LEED reviewers.

The reference guide states that, "Products and materials that do not meet the location radius but do meet at least one of the sustainability criteria are valued 100% of their cost (i.e., the valuat

Hello, I've searched the forum but haven't found a definite answer.

I put this comment in a reply below, but I'm afraid it wont be seen, so I'm starting a new thread... We are renovating an existing historic building which included window replacements, furring out

I'm trying to do my first model for a data center and looking at the table in appendix g of ashrae 90.1.2010 for the hvac system that I have to follow for the baseline model I can't understand if t