I have a v4 core and shell project whose total materials cost will be roughly $36,000,000. The total cost of interiors will be about $1,000,000.

Dear all:- Our project have installed with VRF with TFA Unit Due to TFA unit usage we have significant saving in HVAC because outdoor air supply temperature is very low now we have some doubts in

In our office project there are daylight sensors within 15 feet of the windows which are connected to all lighting fixtures in daylit areas except for a few decorative fixtures on the ceiling (prov

We are working on a project of a shopping mall. The building has a few delivery entrances (on the ground level and underground level) next to the delivery docks.

Does anyone have any experience with projects where a GC has been given the responsibility for implementing the M&V credit using Option B?

Hello, We are submitting data about certain materials that has "zero" VOC content according to manufacturer's datasheet.

Does anyone have any insight/thoughts/comments/experience about categorizing an anti-rust coating as compared to categorizing the product as a flat coating/primer?

Until last week I was pretty sure that all parking whether enclosed by the building, or on the roof of a building should be excluded from the Gross Floor Area number.

Hi we are attempting this credit for one of our existing schools project.The project does not have permanent irrigation system.The landscape area is irrigated manually by the facility staff member