Hi, Can anyone please advise on the following; Do shower flow rates need to be calculated at 80 psi and installed at 80 psi? The same for for faucets, do flow rates need to be calculated at 60 p

Hi, Our project is following the Tenant Neutral option for WEp1c3 because even though the developer is providing all plumbing fixtures, preparations are available in case the upper floors (specul

The reference guide definition of Rc states "0.5 to 5.0 lbs of refrigerant per ton of gross ARI rated cooling capacity". What do you do for equipment that has a charge of above 5.0 lbs/ton?

Minimum duct seal level must comply with table 6.4.4.2A- Ashrae 90, i have this in my specification for duct and i think it apply only to G.I Duct, Not to pre insulated duct, please anyone can clar

Our client is renovating an existing industrial building to lease it out to prospective tenants. The work will be limited to core and shell, and the project is pursuing LEED 2009 C&S.

Hi Marcus and colleagues, The project we have to model is a KFC fast food complex, having GFA of 300 m2 single floor. In accordance to App.

Hi, When determining the most suitable Baseline HVAC System to use, as this is a function of building area and number of floors. Would you count a basement car park as a "floor".

Dear All, I received a comment from reviewers that the laminating adhesives were not included in Table IEQc4.4-1.

In the LEED calculator, can we exclude all irrigation demand within the establishment period?

I am working on a project where LEED was almost an after thought. I was brought into the project just after the 60% submittal.