1. The project pertains to a fit-up of only the 3^rd floor of a multi-floor building. The HVAC scope of the renovation does not include changes to the water-side components and only...

Working on a lab project for which we are trying to use the prescriptive approach.  As there is no AEDG for labs, one of our stakeholders asked if we can use the Large Hospital AEDG - as a large...

Hi,

A lighting design will be installed at a max Lighting Power Density (...

When inputting ENERGY STAR equipment wattage, do we include the idle, average or maximum wattage used by the equipment?

Hi All,

Hope you all are safe.

I am doing energy model for laboratory building registered under LEED ID+C v4. In this building, 80% of areas are designed with laboratory spaces...

I have a small office fit-out project that is pursuing Option 2 (prescriptive) for Optimize Energy Performance. The...

I am looking for some help with the methodology for calculating savings for receptacle loads in a LEED energy model based on Energy Star Equipment.

I have read the modelling guidelines (...

Dear collegues,

Would appreciate information on interpretation of V4 LEED CI credit EA Optimize Energy Performance in part of HVAC zoning. We have project with several rooms without...

Hi to all,

I am doing energy model for one of our LEED CI Project under v4 rating system. 

The following contents are copied from reference guide,

Option 1. Tenant-level...

When building an energy model using Trace 700, is it permitted to use the "ASHRAE Std62 Max Vent (Z) Ratio Allowed" option available in Create Systems - Selection - Advanced menu so that...