So according to 2010 ASHRAE 90.1, there is no...

I have a CI project for a Library.  The team is looking to pursue prescriptive compliance for this credit.  The issue is when attempting to complete the AEDG table, I don't know which category...

I am working on a CI project that is the fit out of two floors of an existing lab building.  The only HVAC available to the fit out floors is 100% OA from the DOAS units and warm chilled water...

Hi,

We are modeling a portion of a building.

The building counts with two dedicated outdoor air systems that provdie outdoor air to the whole building.

We know the amount of...

As we have a VRF system for fresh air, we design a seperate proposed case system module for the fresh air system. Is base case system is required in this scenario should also be taken into...

kinda embarrassed to ask this one, but here goes...

The ref guide and credit template require the team to upload the Target Finder performance results when pursuing Option 2. Prescriptive...

Project Type: LEED ID+C (CI) Version 4

Energy & Atmosphere, EAp2: Minimum Energy Performance & EA Credit: Optimize Energy Performance

Option 1 - Tenant Level Energy...

Hi,

The LEED scope of the TI project I have includes some spaces in 1st floor, whole 2nd, 16th and 17th floors. Is it required to model the whole building area even though it is outside of...

My jewelry store (100m2) has general lighting on the ceiling and millwork lighting for decorative purposes. The general lighting is 16W/m2 compared to the baseline of 18 W/m2. The millwork...

Hi,
We have a LEED CI project where our scope only includes 2nd floor and floors 10th to 16th of a 39 story building. My main question is;
Does LEED require modeling the envelope of...