Topic | Recent |
---|---|
Project Boundary- Excluding ceiling work for HVAC and plumbing connectionsCI-v4 MPR2: Must use reasonable LEED boundariesposted by Tracy Marquis on Jan 8, 2019, 11:36 am
We are renovating spaces on the ground floor of an academic building. The primary renovation spaces are contiguous, however, there will be minor work in the ceilings, outside of the LEED... Last reply: Tracy Marquis, Jan 9, 2019, 11:46 am |
|
Project in 2 separate floor of a same building, can they go for one certification?CI-v4 MPR2: Must use reasonable LEED boundariesposted by shashank gangil on Aug 14, 2018, 10:24 pm
We are new to LEED Certification. We are currently bidding for a new LEED v4 ID+C: Commercial Interior Project. The project is currently operating in two floor (26th and 30th), both are separated... Last reply: shashank gangil, Jan 5, 2019, 4:32 am |
|
Spaces in the basementCI-v4 MPR2: Must use reasonable LEED boundariesposted by Katarzyna Toczynska on Jul 16, 2018, 10:04 am
Hello, We're certifying a CI project for a Client who apart from office space rents also a couple of rooms in the basement which will be built by our Client. Do these rooms have to be... |
|
Certifying 2 separate interior spaces in 2 separate buildings as 1 CertificationCI-v4 MPR2: Must use reasonable LEED boundariesposted by Oliver Bate on Oct 16, 2017, 9:57 am
I have 1 CI project which is taking place in 2 adjacent buildings (Europe). The client is responsible for both interior spaces in each building, but the client also wishes to treat as 1 LEED... Last reply: David Posada, Oct 16, 2017, 6:04 pm |
|
Certify only one floor among three floors that are rentedCI-v4 MPR2: Must use reasonable LEED boundariesposted by Diana Nezamutinova on Jun 21, 2017, 10:12 am
Would you please advise if one newly acquired floor of a 3-floor office eligible to get certified under LEED v.4 Commercial Interiors (see details below)? - A company XYZ has been renting... Last reply: Tristan Roberts, Aug 26, 2017, 2:01 pm |
|
Confidential spaceCI-v4 MPR2: Must use reasonable LEED boundariesposted by Ameet AA on Mar 30, 2017, 5:26 am
Hi, The project is a 3-storey high building, single tenant. The tenant already occupies the building, and going to renovate about half of the floor area. About 25% of the floor area (on... Last reply: David Posada, Apr 17, 2017, 5:50 pm |
|
Qualifications for ID+C rating systemCI-v4 MPR2: Must use reasonable LEED boundariesposted by Mercedes Ferreira on Apr 6, 2017, 7:57 pm
Does the project building need to be a rented space in order for it to fall under the ID+C rating system? Last reply: Tristan Roberts, Apr 10, 2017, 4:14 pm |