Hi all, We are undertaking the energy modeling of an office building and the Baseline is using a System 7, climatic zone is 4a.

I have a building that has multiple separate enclosed buildings for electrical, fire tanks, and water tanks.

Has anyone tried earning 1 point for MPR 6 on this credit as is available in other rating systems?

The sample calculations in the Tool Kit example all have a building on the property. My real life example has some areas with surface parking and no building.

I have a project with two adjacent buildings that are basically physically distinct structures with a short enclosed corridor that connects the two. Can this project be considered one building?

Hi All, Our client uses pesticides/chemicals in their facility, some are those that are commercially available or sold for household use, however the active ingredient is not present on the SF haz

Hi, I have a project planning to use 100% non- potable water for irrigation.They are planning on doing this through collecting rain water.

The definition of Unmet Load Hours has been vague for quite some time. ASHRAE 90.1 2010 was supposed to address this issue. Do we have some resolution about this yet?

If a project is pursuing option 1 development density calculations must there be a residential element recorded within the 60,000sf/acre figure? thank you

Our building has a large number of tenants with separate management. Their IT equipment go back to the manufacturer and do not go to the building main waste stream.