Forum quick links
Existing Laboratory Equipment
CI-2009 EAp3:Fundamental Refrigerant Managementposted by Michele Helou on
Ok - consensus has been and reviewers have supported that existing base building HVAC and central plant systems are exempt from this prereq. Now, does anyone know if reused equipment - laboratory
College Campuses
Pilot-Credits EQpc78:Design for active occupantsposted by Allen Schaffer on
We are submitting a 90,000 SF Humanities Building on a commuter campus. The agency owner has eliminated practically all interior parking over the last 5 years.
Classroom Building on a Commuter College Campus
Pilot-Credits PC14:Walkable Streetsposted by Allen Schaffer on
Our 90,000 SF Humanities Building on a commuter college campus was just about the most perfect project for this pilot credit.
LEED Retail CI EAc1.3 zoning and controls
CI-2009 EAc1.3:Optimize Energy Performance—HVACposted by Francisco Aguirre on
Hi, I am working on a retail project with a VAV system where zoning is performed by variable dampers controlled by thermal sensors in each different thermal zone.
Absoprption material instead of rainwater tank
CS-2009 WEc1:Water Efficient Landscapingposted by FABIO VIERO on
Dear all, we are in the case that it is not possibile to provide a rainwater tank on site so we are exploring the possibility to use a “local harvesting” system.
site fence
NC-2009 SSp1:Construction Activity Pollution Preventionposted by Agnieszka Rylska on
Are there requirements regarding specific fence type around the site?
Copy area in office - acoustical treatment
CI-v4 EQc9:Acoustic performanceposted by Leticia SooHoo on
Hi, we are designing an office space which will have a copy area ( 2 to 3 floor model copiers) adjacent to an open office space.
Compliance with WEp1 building that was constructed after 2007 bu
EBOM-2009 WEp1:Minimum Indoor Plumbing Fixture and Fitting Efficiencyposted by MKK LEED on
Hi, We have a project that is an existing building that was constructed in 2007, but it has water closets with greater consumption than 1.6 gpf (6lpf).
Lr value for refrigerant calculations
NC-2009 EAc4:Enhanced Refrigerant Managementposted by Francisco Aguirre on
Dear all, I am currently working on a project with a VRF system. We have contacted the manufacturer for non-default refrigerant leakage rate values.
Supporting Documents for EAp2 and EAc1
CS-2009 EAc1:Optimize Energy Performanceposted by Alice chen on
Hi all, I am working on a LEED 2009 NC project with IES energy modelling. Could anybody advise what documents need to be submitted for EAp2 and EAc1 certifications?