We're working on a dorm project with apartment style units such that it's essentially multi-family housing. Each apartment has a kitchen and is, according to my MEP, therefore being provided with...

Hi,

We have Fire Station project and submitted Advanced Meter Cutsheet for Electrical.

However, LEED Reviewer Team still required us to provide support documents which includes...

Hello,

We have a manufacturing project where 70%+ of the energy load is for the widget makers. None of the typical regulated end uses (e.g. space heating, interior lighting, domestic hot...

We have a LEED v4 project for the Corps of Engineers that is connected via the local installations BMS to a remote location for managing the buildings energy systems.  The meters and submeters...

I'd like to know if the BMS collecting the meter data would already meet the requirement of remote access to the data or this data should be avaiable for all ocupants.
"The data must be...

Hi all,

Question regarding advanced energy metering. The credit require that any individual energy end use that uses 10% of more of the total annual consumption of the building must comply...

Hello good morming, I would like to discuss the following example: If the simulation result on building level is, that the end use of lighting is >10% and the end use of user...

Hi.

Hope some can help.

In the LEED 2009 version you had to enter the energy consumption for the different measured systems from the Whole building simulation in ordre to see in the...

I'm funneling this question on behalf my mechanical engineer:

Our total breakdown of energy use is as follows:

Total energy use all forms: 543 E10^6...

According to the LEED Credit EA Advanced Energy Metering it is mandatory to “install advanced energy metering for… any individual energy end uses that represent 10% or more of the...