I have a question.  As I understand it, if the operating fan/pump BHP is available I should be reporting it on the Air-Side HVAC tab, in lieu of the nominal (overestimated) HP as it makes a very...

Hi Sir,

Greetings!...

The following content is copied from https://www.energizect.com/sites/default/...

Hi! We recently uploaded a project for review. Unfortunately we missed uploading the actual energy model. Since there has been a lot of personel changes in the current Covid situation, we are...

Dear Everyone,
We model building under Core and Shell certification and the subject building is connected to District Hot Water System which is supplied by...

Hi all,

We are working on a campus project which consists of two separate buildings which, however, do share a common underground floor.

How should we approach the energy model in...

Hi all,

We are working on a new building with a curtain wall system and are wondering how we should be modeling the Baseline building fenestration. I presume we should we be going with the...

Section 9.4.1.2 Space Control indicates that restrooms must have an occupancy sensor. We have a dorm project where each two dormrooms has a shared bathroom. My understanding is that since the...

Hi,

we are working in a project of a new airport terminal. In what relates with energy performance, baseline building lighting power is being calculated as follows:

- we are using...

Hi!

A building being designed for having a mixed yearly energy supply covering heat demand which consists of partly purchased heat (district heating from city network) and partly ground...

System fan power is calculated per ASHRAE 90.1-2010 Appendix G3.1.2.10, where for the systems 3 through 8 fan motor efficiency is part of the formula. The standard says "Fan Motor Efficiency= the...