Forum quick links
COP and SFP values for energy modelling
CS-2009 EAp2:Minimum Energy Performanceposted by shashank jain on
(for a office building in Sao Paulo) COP: For an office building in Sao Paulo, the proposed case uses air cooled system with a COP value of 2.87.
BD+C Tenant Guidelines
NC-v4 INc1:Innovationposted by Stacey Olson on
Does BD+C allow for Tenant Guildlines to be allowed as an innovation credit? If yes, what are the requirements?
Hazard Levels?
Pilot-Credits IPpc98:Assessment and Planning for Resilienceposted by Laura Charlier on
Can someone please point me to where "hazard levels" are defined for this credit?
Seeking photos of protests and/or protest signs, voter lines, etc.
posted by Paula Melton on
Hello! Long shot here, but I thought I would try.
Hotel project in remote island
NC-v4 SSc6:Light pollution reductionposted by Michael Aghabi on
Hello,
We are designing a hotel project in a rural remote area in Saudi Arabia, and have an issue figuring out which Lighting Zone the project falls under.
Daylight Simulation Calculations
NC-v4.1 EQc7:Daylightposted by Jamie Dubbe on
After some research it appears there are a couple of ways to produce the simulation calculations - Insight, LightStanza - however neigther of these are rated as acceptable for use on Depa
Difficulty uploading the form
NC-2009 PIf1:Minimum Program Requirementsposted by Avery Gretton on
Each time that I attempt to upload PI Form 1, this message appears: "Please make sure the correct offline form is uploaded for this credit".
Test makeup water or blowdown water?
NC-v4 WEc3:Cooling tower water useposted by Omar Elrawy on
Dear all,
Should we test makeup water from the water source (incoming), or from inside the cooling tower itself?
Survey conducted before performance period
EBOM-v4 LTc1:Alternative transportationposted by Omar Elrawy on
Is it possible to have the survey conducted before even starting the performance period.