Forum quick links
Lighting Controls - ASHRAE 90.1
NC-v4 EAp2:Minimum energy performanceposted by Esteban Martinez on
Hello
Energy building simulation
NC-v4 EAp2:Minimum energy performanceposted by Tarek on
I took the decision to be a LEED consultant, especially in Energy simulation. so what are the requirements for the LEED certification, qualifications, minimum experience, which program is needed?.
sending back material to Mfgr that was manufactured wrong size, etc.
NC-2009 MRc2:Construction waste managementposted by Debra a. Lombard on
Hello,
Does anyone know how USGBC reviewers would want this handled for C&D waste credit?
How does EPA Method 24 compare to CDPH Standard Method v1.1-2010?
NC-v4 EQc2:Low-emitting materialsposted by Summer Gorder on
We finally found a Static Control Epoxy Coating for a concrete floor that meets the VOC requirement, although it only References EPA Method 24.
Budget Calculation Method - can Option 1 be used for the other categories where all products are compliant
NC-v4 EQc2:Low-emitting materialsposted by Summer Gorder on
I have never had to utilize the Budget Calculation Method for compliance using my GBIM verification system, but have one category that may not comply for a large public project pursuing LEED Platin
Modelling outdoor air flow rate in baseline energy model - ASHRAE 62.1 and Local Code
CI-v4 EAc2:Optimize energy performanceposted by Ciaran McCabe on
Hi all,
NC-2009 WEc1 - Water Efficient Landscaping
NC-2009 WEc1:Water efficient landscapingposted by ayda nezhad on
Hi,
When we calculate the total irrigation design case(L) , is this volume per month or per day?
LEED V4 Homes Total Reduction Calcukator
Homes-v4 WEc1:Total water useposted by Michael Glincman on
Hello All,
Wood Ceilings
Healthcare-v2009 IEQc4:Low-emitting materialsposted by Susan Walter on
I'm hoping someone has found a good pathway for wood ceilings in LEED v4 and can share. The CDPH test includes a formaldehyde test which of course all wood contains.