The requirement reads " Provide individual lighting controls for 90% (minimum) of the building occupants..." Is this based on the FTE? Or does it mean 90% of the individual workspaces?

Our client is building a Retail center for a large grocer with small satellite retail spaces. The balance of the building is simply a parking garage with an enclosed and tempered elevator lobby.

This building is over 300,000 sf and located close to public transportation. Half of the tenants are government agencies.

Almost all the spaces in our building is mechanically ventilated, except the entrance lobby which receives outside air through revolving doors. The revolving door opening area and the 8 m.

Hello, The guidance is not really clear on what to put in the baseline case. It only says that we need to specify typical landscaping practices.

Our project is a major renovation of a 2-story historic building. The existing window openings can not be changed without significantly altering part of the preservation.

We have disignated smoking rooms in the building. Now we are planning to carry out negative pressure defferetial test for thes rooms. There are 2 questions. 1.

I can't use the Supplemental Spreadsheet. I believe it might be because its not designed to be very compliant with Mac software, though this is a guess.

We are going for LEED CI v2009 in a LEED CS v2009 building. Both are in design. Our client (LEED CI) will be in more than 75% of the building.

If our project puts a Kiosk in the lobby showing a video of all the sustianable attributes of our project in addition to placing signs through out the building, would that count as two ID credits o