Question: If I have an air cooled chiller selected at non-ARI conditions that has a full load efficiency of 3.0 COP, does it comply with the minimum efficiency requirement of 2.8 COP from ASHRAE -

I have conflicting information on a few Innovation points that have been achieved on certain projects, but are apparently being denied on current projects being deemed "too easy" by the GBCI review

If my project does not have any heating system at all (but it will have cooling system), Are the baseline and proposed models required to have defualt heating system as specified in appendix G?

If I have a space (manufacturing warehouse) that is served by Evaporative Coolers only. Do the Mandatory Requirements of ASHRAE 90.1 section 6.4.3.4.2 & 6.4.3.4.3 apply?

I can see in the threads some discussion about submeters and what really constitutes complying with Case 1 but I'm still confused.

I'm not sure where to post this EApr2 form but Lighting Power Density question. I see there has been some discussion about the issue of Title 24 vs.

I would like to use IEQc4.6: Low-Emitting Ceiling & Wall Systems from NC-Schools as an ID point in my NC-not a school project.

I am assisting on a project that is 8,000 acres. The LEED FAQ sheet suggests that projects greater than 320 acres certify under multiple submissions.

I'm working on a LEED-CI offices project.

Hellow Everyone, 1) In the case of a technical space (equipment room) that is a Conditioned Space as per ASHRAE 90.1 and, therefore, must be simulated as a heated/cooled reference office space: Sh