Our project has no new parking. We are on a campus where there is an existing parking lot adjacent to our building, but not within our LEED project boundary.

Dear All, We are working on a shopping mall project which is pursuing LEED for C&S certification.

We have a building which shares electricity meter with an adjacent building, only one building will be intended for certification, it is possible to identify the percentage of consumption in every

For a preliminary review I modeled a building that is heated and cooled by four geothermal heat pumps that are located in a technical room within the building.

Hi, It looks like USGBC has closed this pilot credit to NC 2009 projects.

I am submitting a project under v2009, but my pest control contractor has been encouraging us to switch to the v4 pest control guidelines instead of the v2009.

Hi, I'm hoping to get some feedback on what is actually required to be uploaded in support of table 4-1.

In the EAp2 and EAc1.4 for LEED CI v2009, you established that projects may include only new equipment and appliances purchased for the LEED-CI scope of work in the list for Energy Star rated equip

Hi all, Is it possible to use the refrigerant R-1234 (HFO) to replace the R-134 in a centrifugal chiller? It has low GWP (around 4 or 5) and zero ODP, but it is not in the LEED online form nor in

For a project located outside US, should the VOC content of a paint or coating not tested as per SCAQMD or Green Seal or CARB Standards be included in the VOC budget method?