We have some overhead rolling doors (for trucks to enter the garage portion of the commercial building) along with some man doors.

Is there any criteria as far as what a View Preserving Shade actually is? There are openness factors as low as 1%; yes, you can see through them, but not much.

The building our project is located in uses municipally supplied recycled water to serve the supply to the water closets and urinals. Can this be used to calculate additional savings?

Greetings, In the project we are modeling, there are air conditioners which are supposed to operate in cooling mode at OA temperature close to the design heating OA. In this table and also in othe

The LEED v4 Reference Guide offers three was of determining equipment efficiencies, distribution losses, and distribution pumping energy: Monitored data, engineering analysis, and default values.

The LEED v4 Reference Guide offers three was of determining equipment efficiencies, distribution losses, and distribution pumping energy: Monitored data, engineering analysis, and default values.

The project in question is the north building of a 2-building, 1 million sf facility.

We are working on a project where there is not enough room for on-site separation, and the commingled waste will be picked up by the sorting facility.

We are working on a v3 design phase project in Switzerland that is using SIA (swiss standard) as the design Ventilation rates.

I'm currently working with a CFD modeler for the contaminants portion of this credit. We're having trouble finding the generation rates per square foot of active contaminant.