The EAp1 v4 requirement is to meet ESv3 by completing the thermal enclosure system rater checklist, the HVAC system quality install rater and contractor checklist and the water management system bu

Hi, Is it required that the Tenants comply in their lighting designs with the Lighting Power Density requirement of ASHRAE 90.1 2007?

Is it possible to install a well specifically to collect groundwater for irrigation to meet the intent of the credit to reduce potable water use for irrigation?

For a new office building would it be acceptable to use these error margins for an M&V Report.

I've determined the occupancy for a hotel project we are working on based upon LEED interpretation 2706606.

On a hotel project we are trying to avoid putting two bins within the rooms.

Hi, Is it compulsory to sign a 10 years contract with the solar PV supplier (the PV panels are installed on the rooftop of the project building)?

Dear Concern:- Our client produce huge amount of Renewable energy by wind mills and the energy produced via wind mill is almost 5 times greater than LEED project annual energy consumption so pl

Hi, I have form V01 for WEp1, and I can't find any information to say that this form has been updated (V01 is the only one listed on USGBC forms source), but there was a reference somewhere to an u

Is it an absolute requirement that the proposed pressure (in PSI) matches the baseline. Can we use a flow rate at a lower pressure to avoid excessive pump sizes ?