Does CI certification require energy modeling for silver certification?

All, How does LEED CI and section 11 modelling view process energy? For an industrial / manufacturing facility with new process equipment in particular. In 90.1, process energy is not dealt with.

Our restaraunt is about 50% over the current allowed wattages. What can we do to drop it? Does 'graphical lighting' have to be counted in the total?

Hi, If an AHU (initially outside of the scope of work) had to be modified in order to comply with the ventilation requirements of Standard 62.1-2007, does it have to comply with the requirements

In the Commercial Interiors project, the envelope and the base HVAC system is not in the scope of the interior project. HVAC for only a few cabins are in the scope.

I know that for EAc1 there was a requirement that "All LEED for New Construction project registered after June 26, 2007 are required to achieve at least two (2) points." Since I am working on a LEE

We are working on a CI project which occupies portions of four floors in a University Medical Research Building.

Total lighting load for project space under EAc1.2 would be the same as connected lighting load under EAp2?

Does this credit require the use of Section 11, or can Appendix G be used? I previously asked this about EAc1.3, but this credit does state section 11 in the language.