Hi all, When submitting documentation for this credit, through LEED Online, are we supposed to upload all the plans showing the thermal controls or can we just upload some of them (i.e.

Dear All:- Our project have meeting, conference, training rooms, Canteen (Food), pantry (Coffee stations) The meeting room have one round table with 9 occupants but table is single so we provide

If there is a manually controlled exhaust fan (hood) at a workstation within a kitchen would it be considered as a means of thermal control for that workstation.

I was wondering in order to comply with this credit, will we have to provide thermal controllability for 50% of the 7 cubicles or can we just consider it a multi-occupant space?

Hi I have a project where the temperature must be controlled automatically to ensure the manufactured product quality is maintained.

I'm working on a factory project, consisting of 7 buildings. Among them, three are lockers buildings (I mean exclusively lockers, without any other spaces).

Multifamily: For a small unit, you may only need a single control—it can be a window or a thermostat.

For the individually occupied spaces in a typical office building, how close to the FTE occupant number being used in PI Form 3 does the total building occupant number being used for this credit ne

We are working on a higher education project which is made up of mostly multioccupant spaces. We have 30 workstations in an open office as well.

Dear all, I've got the following note during my preliminary design review: "2. Several spaces have not been included on the form (....).