Hello all, I am working on an industrial manufacturing building where a piece of the process equipment will be painted onsite as part of the installation requirements, but as it is part of the eq

A question regarding Thermosetting plastic flooring, how and when do we measure the VOC content? In the different components or in the whole product.

I have seen that this topic has been discussed quite a bit previously, however I haven't seen any consensus on the subject.

Does this require testing after it is in place?

Dear all, I have a polishing powder that is intended to be used for polishing marble surface.

Hello all, I am confused how to identify one product that is going to be used on a concrete slab inside our project building.

Which category should paint paste fall under? How can I establish the VOC limit? Thank you very much

Good morning friends, I would like to understand how to use the table SCAQMD Rule 1113 to know the VOC limit in any material in general, and in floor coating specifically.

Under Rule 1113; June 3, 2011 Architectural Coatings: Form Release Compounds have a current limit of 250 g/L and then 1/1/14 it drops to 100 g/L.

We are semi-new to the LEED program and want to be sure that we are following all of the necessary guidelines to achieve the overall credits for the project.