taking over a project that was set up already in LEED. in the spreadsheet there are two extra rows for items not in the project (lacqeur, and floor coating). I cannot delete them!

This is in reference to Green Seal GS-11 section 4.4 and 4.5. I am working on a project that is looking to use Dryfall Paint. the Flat paints meet the

I am a little confused by the anti-rust paint/coating VOC limits.

What is the VOC limit for a Terrazzo Sealer? I'm a bit confused about which category it falls under (Sealer, Floor Coating, or other).

Hi! In one of our projects, we must use a high performance polyurethane coating on the floor due to its superior chemical and abrasion resistance.

Do factory applied paints need to comply with the VOC limits? Or only paints and coatings that are applied on-site?

I would to know if there is any variation in the limit of VOC emissions from paints allowed, if this painting is located in ventilated spaces such as courtyards, or in spaces with temporary occupat

I'm working on a LEED project and I have a submittal for a concrete waterproofing product that exceeds the current VOC limit of 100g/l.

Are the primer and topcoat applied to the fire fighting and HVAC systems pipes required to be compliant with VOC limits if the pipes are hidden inside the wall and flooring layers or above the fals

What's the difference in SCAQMD Rule 1113? I know it doesn't matter, as both limits are 250 g/L, but why are there two entries, and why is 'Interior ' lower than 'Stain'?