For this kind of sealant, can I just put it under Architectural Sealant?

I received an interesting question from my contractor - he is requesting to use a general construction adhesives sent to him by the woodwork sub (it's a Liquid Nails product from Akzo Nobel Paints)

Hi, Our project is located in Japan. We usually classify tiles and stones to porous materials in our country. Porous material is defined as follows according to SCAQMD Rule1168.

Should plumbing piping insulation be considered for this credit when you are using rigid or flexible glass fiber?

Dear All, Our project uses a cement based adhesive powder that will be mixed with water and then applied. We have data for the powder that it has 0 g/l VOC, and the applied quantity in kg.

For an office application we have an air-supply plenum for conditioning the space, what is the maximum content of VOC allowed for the plenum sealing material? Thanks in advance.

we are a GC working on a project that is the renovation of a historic bldg and that renovation started a very long time ago '(about 3 yrs ago) and about a year before the project was registered for

We have the following materials called out in the 03 30 00 Cast-in place concrete spec: 1. Semi-rigid joint filler 2. Bonding Agent 3.

I am at a loss for the comments made by our LEED reviewer about an aerosol adhesive. The product is a general purpose mist spray aerosol adhesive with a VOC content of 53.2% by weight.