Forum quick links
Breathing zone ventilation
NC-2009 IEQp1:Minimum IAQ Performanceposted by Rudolph Carneiro on
Must Vbz be met for all zones in a multizone system? Section 6.2 states that the VRP procedure is for determining Vot and not Vbz.
Natural Ventilation by Windows
NC-2009 IEQp1:Minimum IAQ Performanceposted by Chinthaka Jagodaarachchi on
Can an air conditioned space that has operable windows earn minimum IAQ performance prerequisite by demonstrating the compliance with natural ventilation requirements? Kindly advise.
Occupancy canteen/lobbies
NC-2009 IEQp1:Minimum IAQ Performanceposted by Jean-Baptiste Noel on
For our project, the canteen was designed with an area that would give an occupancy of 1400 people if we were to follow the default ASHRAE 62.1 occupancy, which is very high given the fact that abo
DCV control
NC-2009 IEQp1:Minimum IAQ Performanceposted by Rudolph Carneiro on
Can someone help me with exception "b" of mandatory section 6.4.3.9 in 90.1. What is meant by the following: b.
Form Filling - Mixed Ventilation (Natural & Mechanical)
NC-2009 IEQp1:Minimum IAQ Performanceposted by Manuel Gonzalez Zapatero on
Hi, our commercial building uses both mechanical and natural ventilation.
VRP calculations for multi-family buildings
NC-2009 IEQp1:Minimum IAQ Performanceposted by Courtney Royal on
Hello, Our building is a multifamily building project and my question is, are we still required to complete the VRP calculations for this prerequisite?
Fancoils in the same Area
NC-2009 IEQp1:Minimum IAQ Performanceposted by Marina Andrade on
Hi! When two or more fancoils meet the same area, can be considered as a single zone, correct? Thanks!
Ventilation through adjoining room
NC-2009 IEQp1:Minimum IAQ Performanceposted by LEED Pro Consultant on
Hello, Our project is a residential building and will have no mechanical ventilation in the apartments. For this case, LEED asks us to comply with ASHRAE 62.1-2007 paragraph 5.1.
Required to use Actual Occupant Density?
NC-2009 IEQp1:Minimum IAQ Performanceposted by Michelle Robinson Schwarting on
I've gotten a few reviews back recently that request clarifications based on the following: "Please note this form appears to use the default occupant densities from ASHRAE 62.1-2007 Table 6-1.
Hi-Wall Filter
NC-2009 IEQp1:Minimum IAQ Performanceposted by Marina Andrade on
Hi! can i use a hi-wall in my project? The hi-wall don't have a merv 6 filter, but the outside air in the environment have. thanks!