Post a question or comment
Credit Filters
Minimum Energy Performance
Filter by location
Forum
Topic
Replies
Recent

New ASHRAE compliance path

NC-2009 EAp2:Minimum Energy Performance
posted by  Paula Melton  on 

Is this new compliance path likely to have any effect, direct or indirect, on prereq/credit documentation?

2
LEED Fellow
7group / Energy Opportunities
LEEDuser Expert
4454 thumbs up
Mon Feb 8, 2016, 5:34 pm

Process Energy Exceptional Calculation

NC-2009 EAp2:Minimum Energy Performance
posted by  Maya Karkour  on 

Hello, we are considering attempting the exceptional calculation method allowed in Section G2.5 for process load savings on a hospital project: the design is proposing equipment sterilization throu

3
Default Avatar
EcoConsulting
LEEDuser Basic Member
549 thumbs up
Fri Feb 5, 2016, 8:15 pm

CHP District Energy System

NC-2009 EAp2:Minimum Energy Performance
posted by  Emmanuel Pauwels  on 

We are working on the certification of a building that will be connected to a DES using a CHP plant.

6
Fri Jan 29, 2016, 9:25 pm

MODELLING PUMP IN PROPOSED CASE.

NC-2009 EAp2:Minimum Energy Performance
posted by  VEL MUTHU  on 

I am Currently working in a project aiming for certification under group certification. I am using DES V2 guideline and opting option 1.

3
Thu Jan 28, 2016, 7:37 pm

Baseline HVAC Systems

NC-2009 EAp2:Minimum Energy Performance
posted by  Khaled Fouda  on 

I am Energy Modeling a highrise new construction in NYC.

3
Design Engineer, LEED AP (BD+C)
Energy Concepts
LEEDuser Basic Member
5 thumbs up
Wed Jan 27, 2016, 3:29 pm

Elevation with more than 40% glazing

NC-2009 EAp2:Minimum Energy Performance
posted by  Charalampos Giannikopoulos  on 

For a building with an elevation with 70% glazing and the others with less than 40%, how would the baseline elevations be modelled?

4
Wed Jan 13, 2016, 9:17 am

ASHRAE 90.1 2007 Appendix G System Type 6

NC-2009 EAp2:Minimum Energy Performance
posted by  deborah davidson  on 

We are working on a project which falls under the category of System 6 - Packaged VAV with PFP Boxes for the Baseline Building.

2
b.i.g. Bechtold DesignBuilder Expert
LEEDuser Basic Member
581 thumbs up
Wed Jan 6, 2016, 2:46 pm

4 point mandatory minimum

NC-2009 EAp2:Minimum Energy Performance
posted by  Charalampos Giannikopoulos  on 

Recently an addenda was published to refer that "for projects that register after XX/XX/XX and are subject to the four point mandatory minimum, demonstrate an 18% improvement in the proposed buildi

4
Wed Dec 23, 2015, 6:47 pm

Major Renovation Building Energy Modelling

NC-2009 EAp2:Minimum Energy Performance
posted by  SAMY Chamy  on 

Dear All We are currently working on a Major Renovation Building.

3
Enginneer
T&T Green
LEEDuser Basic Member
9 thumbs up
Tue Dec 22, 2015, 3:19 pm

U-value for Green Roof using Appendix A

NC-2009 EAp2:Minimum Energy Performance
posted by  Santiago Rodriguez  on 

Dear forum, We have a project where the proposed design includes a green roof, but there is no insulation. The roof has a metal deck below the green structure.

4
Thu Dec 17, 2015, 9:53 pm