I'm working on a science building on a prep school campus with a lot of lab space. It was entered as a school into Target Finder, but obviously compares poorly to regular school buildings.

Hallo Marcus, I am doing a WBS for an office building, which cooling is supplied by ground water. The only energy consumption of ground water cooling is the energy need for the water pumps. The e

Dear All, For modelling pumps for my Proposed design, I have a manufacturer's datasheet for a Variable speed pump (Secondary pump) with the following values: Duty Flow = 209.5 gpm Du

Dear all, We received the Design Final Review for our project, and a total of 7 credits were denied. 1) If we have initially provided documentation which has not been interpreted correctly by the

Is the Performance Summary Report generated by Trane Trace 700 (Ver 3.0) be enough for the LEED V4 EA credit?

In a multiple building project we have 100 identical staff housing units that need to comply with AHRAE for EAP2. Must we test each and every building and can we do a % of them?

62.1 has an exahust requirement for mechanically ventilated Parking garages (Table 6-4), with an exception C - no ventilation required if two or more sides comprise walls that are at least 50% open

Dear All, I am working on a project where the base case is packaged single zone and proposed case has split units. The unmet hours in proposed case is less than 300hours in each zone.

do we have any area requirement for energy modeling i.e. Minimum area to opt for Option 1 Whole building energy modeling aproach for EAP2?

Hi All, I am working on a LEED NC 2009 project and have questions about filling up the v2009_Minimum Energy Performance Calculator_v06. Hope someone can give me some advice.