Post a question or comment
Credit Filters
Minimum energy performance
Filter by location
Forum
Topic
Replies
Recent

Floodlight

NC-2009 EAp2:Minimum energy performance
posted by  Ameet AA  on 

2. Lighting requirement from ASHRAE 90.1-2007 Appendix G?

1
Fri May 18, 2012, 4:57 pm

Chilled Water Required for process

NC-2009 EAp2:Minimum energy performance
posted by  Dave Hubka  on 

Hi Marcus, Our project is a manufacturing building. The 'widget maker' requires chilled water which is typically provided by the chiller/cooling tower.

1
Tue Aug 30, 2016, 4:37 pm

heating section type

NC-2009 EAp2:Minimum energy performance
posted by  Francesco Passerini  on 

I'm modeling a baseline system according to System 5. I am considering Table 6.8.1A in order to determine the performance of the DX cooling coils.

1
Mon Sep 23, 2013, 1:53 pm

HVAC Climate Zone 1

NC-2009 EAp2:Minimum energy performance
posted by  John Covello  on 

Hello, We are working on an office space in climate zone 1. ASHRAE 90.1 does not require heating for these zones. Is some form of cooling such as air conditioning required? John

1
Tue Jun 24, 2014, 1:08 pm

ASHRAE 90 2007 item 9.4.4

NC-2009 EAp2:Minimum energy performance
posted by  Iqbal Khalilullah  on 

Hi Marcus, Please advise me regarding ASHRAE 90.2007 mandatory provision item 9.4.4 which is written as follows: "All exterior building grounds luminaires that operate at greater than 100 W shall

1
Mon Apr 6, 2015, 3:34 pm

9.4.1.2 (Space Control)

NC-2009 EAp2:Minimum energy performance
posted by  Carolina Vergnano  on 

In the item 9.4.1.2 (Space Control) of ASHRAE 90.1-2007, it is not clear if the lights of the classrooms/conference/meeting/break rooms have to be controlled only by occupancy sensors controls.

1
Mon Jun 11, 2012, 7:29 pm

Exceptional calculation for process load

NC-2009 EAp2:Minimum energy performance
posted by  Charalampos Giannikopoulos  on 

What would be the process of an exceptional calculation to prove reduction in process office equipment density for an office building?

1
Wed Oct 5, 2016, 7:26 pm

Modeling Existing Trees

NC-2009 EAp2:Minimum energy performance
posted by  Marina Andrade  on 

Hi Marcus, I was reading the discussion about modeling adjacent shading for the both models (baseline and proposed models) that you had with Mark Benson, but It's still not clear for me. I’m work

1
Mon Mar 4, 2013, 5:49 pm

Climate zone outside the USA

NC-2009 EAp2:Minimum energy performance
posted by  Xing Shi  on 

We just finished the design submittals of 2 projects in Jiangsu, China. Does ASHRAE set climate zone in China.

1
Mon Jun 27, 2011, 6:10 pm

How to model electric wall heaters in PRM energy model

NC-2009 EAp2:Minimum energy performance
posted by  Veronica Reed  on 

Hello, We are renovating a 1905 two-story small historical landmark building as a 12 room boutique hotel, thus cannot include HVAC systems due to planning and preservation restrictions, and the lo

1
Wed Mar 16, 2016, 12:15 am