We have two lavatories to be used for medical purposes in our buldings: one in the esterelization room of an ambulatory and the other in a medical office.

I have a fixture usage group with 4 FTEs and there's a shower in it. Shower daily uses is 0.1, so the template calculates my total daly uses as 0.1 x 4 = 0.4 and it rounds down to 0.

Dear all, The project has 2/4 LPF WC fixtures specified, and the water calculations done accordingly.

LEED NC 2009 says in p.170 "In buildings with multiple shifts, use the number of FTEs from all shifts". We have a 24hs building, with 4 shifts, some of them overlap.

We recently completed a new building where we used American Standard Cadet FloWise pressure-assisted 1.1 gpf toilets. The problem is that these toilets do not work properly.

Hi all, I was surprised to receive a recent review comment for WEp1 noting that we had left out the janitor sink faucet in our calcs.

We are having a little trouble with the flow fixture table calculations. We specified Sloan automatic sensing faucets.

We are working on a project that will include metered urinal faucets with an adjustable 4 - 10 seconds timer.

Hello All, Can you please provide your insight?

We are working in a hotel project where no kitchen sinks have been installed in guest rooms. guests come to restaurants within hotel premises to take meals.