We have a building under construction now for which we will pursue LEED certification.

I am not sure if I am in the correct subject, but I did not find any answer or forum subject regarding this particular matter.

LEED-NC PIf2 - second row prompts user to fill out "total gross square footage / gross floor area" im confused what they are asking for. and also not sure where to look to research this.

I am working on a large dormitory project which requires a "spoil area" on an adjacent lot which accommodates the excess soil in the cut/fill process of regrading the site.

I have a commercial office tower that will be purchased once completed. The underground parking for this tower however will be owned and managed separately.

Hi, I have a garment factory and the loading bay is actually inside the footprint of the building, taking up about 10% of the ground floor area.

Where can I find guidance on what density is considered Urban or SubUrban?

Can anybody share the regular steps to decide the target credits or green level when pursuing LEED-EB&OM certification as a LEED AP? And what the common factors considered? (For E.g.

Hi, Our project is 133,624 sf.

I am working on a project that has a small, separate generator enclosure/ maintenance building. It is not connected to the building, and it is not conditioned or ventilated.