Can anybody share the common factors considered when selecting technologies for credits? (E.g. Easy installation, Low-Cost, Multiple credit achievements, etc. )

Hello, We are adding a pedestrian crosswalk to connect the building to the opposite side of the street. This was not required and are hoping to achieve an ID point for including it.

We are currently assessing office building which has 2 underground floors. On level -2 there are only: parking, storage, mechanical rooms etc.

When we registered one of our healthcare projects we entered it with a gross project square footage of 14,300. Under the LEED project, the 2nd floor will just a floor and shell, with no finishes o

I'm working on a project containing one Basement, Ground and a first floor, it is a residential building, its building footprint meets the minimum program requirement.

I am working on a project where the architectural work includes "facelift" work with no HVAC upgrades in roughly half of the scope.

We would like to register a factory building in Bangladesh. Th built up area of factory building is 2 lakh SFT, Ground level only.

LEED-NC PIf2 - second row prompts user to fill out "total gross square footage / gross floor area" im confused what they are asking for. and also not sure where to look to research this.

I am working on a large dormitory project which requires a "spoil area" on an adjacent lot which accommodates the excess soil in the cut/fill process of regrading the site.

Hello, I am working on a museum project with an existing building that is not a part of the scope.