Post a question or comment
Credit Filters
Filter by location
Forum
Topic
Replies
Recent

Laminating and Contact Adhesives - Shop Applied - in v4

NC-v4 EQc2:Low emitting materials
posted by  Landry Watson  on 

I've scrolled, searched and reviewed the comments here on the thread and I'm still not clear on whether Laminating/Contact adhesives used for bonding laminates to substrates for shop assembled mill

10
Tue Mar 26, 2019, 12:55 am

Tree distance for Tree-lined (v4)

ND-Plan-v4 NPDc14:Tree-lined and shaded streetscapes
posted by  Nuttanee Vongveeranonchai  on 

Regarding Ref Guide (p.291) in tree-lined step-by-step guidance, it says the distance between tree truck to the center of the next tree trunk shouldn't exceed than 50 feet (12 met

3
Mon Mar 25, 2019, 5:24 pm

Heat Island Reduction Roof

EBOM-v4 SSc3:Heat island reduction
posted by  Nitesh Kumar J  on 

What if there is a Shed on the Terrace? Since the sun rays are not falling directly on to the terrace and no direct expose of terrace surface... Will such project comply this credit ??

2
Default Avatar
Mr
Green City Associates
LEEDuser Basic Member
0 thumbs up
Sat Mar 23, 2019, 12:34 am

University Housing

Schools-NC-v4 LTc5:Access to quality transit
posted by  Sean Adams  on 

We are doing a university housing project and have been basing it off of the BD+C New Construction but for this section if we are able to do it under School-NC we would be able to get the 4 points

1
Tue Dec 15, 2020, 9:36 am

Pilot Credit MRpc87 - Verified Construction and Demolition Rates

NC-v4 MRc5:Construction and demolition waste management
posted by  Tiffany Wilmot  on 

How does a C&D recycling facility get certified in order to attain the Pilot Credit MRpc87 (Verified Construction and Demolition Rates)?

1
Fri Mar 22, 2019, 3:05 pm

Refrigerated Storage rooms ventilation requirements

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Luis Andrade  on 

Hello,

I have a doubt regarding the need to ventilate refrigerated warehouses or storage rooms.

2
Thu Mar 21, 2019, 11:53 am