See LEEDuser’s guidance on NC-v4 EQp1 »
Post a question or comment
Credit Filters
Minimum indoor air quality performance
Filter by location
Forum
Topic
Replies
Recent
Default Avatar

Airflow Monitoring with DCV

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Nancy Henderson  on 

Hello, we have several projects that are using single zone RTU's with CO2 based demand control ventilation.  We have already established through conversations with a LEED Coach that the units

1
Tue Dec 4, 2018, 6:57 pm
Default Avatar

Multizone VAV with FCUs

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Gopinath Vasu  on 

Hi All,

0

Problems with the calculator found in the resources tab in the credit library

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Maria Porter  on 

Hi!

1
Tue Dec 11, 2018, 6:54 am
Default Avatar

Ventilation in vestibules

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Instra Ingenieros  on 

Dear all,

We are working with a project located in a 3C climatic zone. Therefore, our building’s main entrances include a vestibule as mentioned in section 5.4.3.4.

3
Tue Oct 30, 2018, 8:41 pm

CIBSE AM10 Flow Chart (Figure 2.8)

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Vitor Tosetto   on 

Dears, I'm developing a small project LEED v4.

3
Tue Oct 30, 2018, 12:40 am
Default Avatar

Ozone Filtration in C&S V3 Building

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Jose Antonio Velazquez Ambrosio  on 

Hello everybody.

0
Default Avatar

Radon in school building

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Luis Andrade  on 

Hello,

0

Outdoor air calculator for Healthcare facilities

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Gabriela Mena   on 

Hi, 

 

We are working in a Healthcare facilities project. How can we document compliance with the minimum Outdoor Air Changes required by ASHRAE 170-2008 Table 7-1?

0
Default Avatar

Does restrooms exhaust can comply with the prerequisite requirements in a residential building?

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Felipe Duran  on 

Dear All,

We are working on a naturally ventilated residential project with 295 dwelling units. The project comply with the monitoring requirements. 

1
Wed May 15, 2024, 10:04 am

Can zone population be zero for occupiable storage rooms for liquids and gels

NC-v4 EQp1:Minimum indoor air quality performance
posted by  Edgar Arevalo  on 

Would it possible to input zero for an occupiable storage rooms for liguids and gels in the Minimum IAQ Performance Calculator?  I ask because the building in question is a maintenance garage

0