Reviewing a submittal for wood filler and the product data/msds sheet doesn't include VOC information.

Using IEQc4.1 template version 4.0, in the notes under table IEQc4.1-1, the note #1 states "in the case of aerosol adhesives, the project team must provide a conversion of both the product VOC cont

We have a current school project that is under construction. The CM and contractors cannot find a firestopping sealant that is CA 01350 compliant. Any suggestions?

Quick question on how to classify epoxy adhesive for expansion joints: The product data from the vendor, Emseal, states the VOC is 100 g/l, now which VOC limit do I use since these joints will be

In attempt to clarify the wording for IEQ4.1 and IEQ4.2 that states "...defined as inside the weatherproofing system and applied on-site..." does this mean that both conditions must be satisfied fo

For the Low emitting materials- adhesives & sealants, there are 3 adhesives that are between 195 and 320 g/l over the VOC limit. I am using the Special purpose contact adhesive limit.

Hello, The contractor is planning to use a moisture barrier product that has 0 (zero) VOC content. Is this acceptable for LEED for Schools 2009 or do we need a Small Scale Chamber test for it?

In processing the IEQc4.1 I am running into products that call out the VOC content, but I do not know the limits that need to be met for CA Section 01350. Does anyone know those numbers?

I have a question about which VOC limit to use on the chart...