According to the reference guide, there are: CASE 1 OPTION 1, where smoking is prohibited, CASE 1 OPTION 2 (Non-residential projects), where smoking is prohibited except in designated areas, AND C

Hi, I was wondering if the v2.2 option (HERS methodology) would still apply for v2009 in regards to the blower door test and number of units that must be tested.

Dear all, We're going for Option 1 of this prerequisite for a very large retail mall. No smoking will be allowed indoors, and we will provide "NO SMOKING" signs internally. Any thoughts on the r

Dear all, our CS project has one designated smoking room to be constructed within CS. We would like to go for a split review. Credit is asking for differential pressure measurement.

Hello, we are currently working on a project and the owner intends to include several smoking rooms for the project.

Our Blower door tests of the residential top floor of a mixed use building reports the findings as Total Airflow through the door seals [m3/h] at a given pressure differential [Pa].

We have a project in Rio de Janeiro registered under CS and to which the fan door test shall be conducted since it is composed of three residential buildings.

We have a project in which the location of the fresh air intake for the garage parking is proposed to be located

We are currently working in a residential project. It will probably be a C&S due to the project scope. Some residential units have private balconies.

We prohibit smoking in our office buildings, but have a central plaza which will provide designated smoking area. Question: does that designated smoking area need to be covered? Thanks!!