I wonder how I should model a Ventilation system to comply with Apendix G ASHRAE, it said that my proposed desing shall be consistent with design documens.. This is the description of my system: &g

I am doing the energy model for a CS project.

Hi, I'm running an energy simulation on a three floors office building. This building have also an entrance hall. The HVAC system for the office part is a VRV Fan Coil System with external air con

Seems that some of my questions are not easy to answer. Here is another question for the same lab project. Fan system Power limitations are calculated according to Table 6.5.3.1.1A of ASHRAE 90.1-

RE: LEED CS EAc1 We need input on how to model the 6th floor residential portion of our mixed-use building? Our specific concern is the lighting. Any help is appreciated. Thanks--

Hi, I am working on a office building of about 15,000sqm using AHU with underfloor system.

Hi, I have a LEED project that is split up into 3 separate blocks. Each block is made up of mainly office space. On the ground floor there is retail units.

We are working on a project with two buildings on one site, one commercial C&S, one Hotel.

How does one know what baseline glazing type to model. Table 5.5-5 list various Fenestration types but it is not clar which one should be used. Maybe somebody can clarify ? Thanks.

We are using packaged VAV with reheat system 5 for the Baseline System.